RENOVATION - SERAPOOL Porcelain

125 POOLRENOVATION: Standards Üzeyir Uludağ, Founder of Artes Havuzculuk and Mechanical Engineer room to be prepared in accordance with projects and standards are listed below: • Plastering and screeding work. • Installation of wall and floor coverings. (The floor covering must be anti-slip; it must be applied with tiles or another material with this feature). • Installation of the drainage line for the construction of the sump in the machine room. (It is recommended to connect it to the rainwater line during implementation.) • Installation of the backwash line connection from the machine room outlet to the rainwater line. • Installation of machine room lighting. • Ensuring the machine room is ventilated either forcibly or naturally. • Installation of machine room doors according to the dimensions specified in the prepared projects and fitting of locks. • Independent ventilation of chemical storage areas. • Pulling the necessary city network lines for the balance tank feed and pool filling to the points specified in the projects. • Providing the necessary permanent power line for the machine rooms. • Verifying the suitability of the grounding lines in the machine rooms. (This service can be obtained from the Chamber of Electrical Engineers.) Evaluation of Existing Systems: Testing and Analysis Process First, taking into account the size and intended use of the pool, we determine whether the equipment used in the pool complies with the relevant standards and report our findings. If the report and pricing we submit to the employer are found to be appropriate, we replace the equipment in the system with new equipment that complies with the standards. If the employer does not accept our proposal, we do not carry out any work on the existing situation. metal and is affected by moisture in the machine room. Manufacturing to be Performed by the Employer in the Machine Room The main construction and infrastructure applications that must be carried out by the employer in order for the machine INTERVIEW